The ceramic fiber muffle furnace heating wire adopts the world's top alloy material. The heating temperature of the ceramic fiber muffle furnace is uniform and the heating speed is fast. It only takes 12 minutes to rise to 1000 ℃ (very suitable for the chemical industry), while the traditional muffle furnace needs about 80 minutes, and the energy saving performance is good. BA-3-10B ceramic fiber muffle furnace It is about 40% of the energy consumption of ordinary muffle furnaces, and no dust or slag will not affect the effect of the test.Improvement of Soft Magnetic Properties of FeCo Alloys by Vacuum Heat Treatment When the ceramic fiber muffle furnace is used for the first time or after a long-term non-use, it must be oven-baked. The oven time should be four hours at room temperature of 200°C. 200°C to 600°C for four hours. When using, the maximum furnace temperature should not exceed the rated temperature, so as not to burn the electric heating element. It is forbidden to pour various liquids and easily soluble metals into the furnace. The Maofu furnace is best to work below the maximum temperature of 50 ℃, and the furnace wire has a longer life.Vacuum Sintering of Alumina Ceramics The muffle furnace and controller must work in a place where the relative temperature does not exceed 85%, and there is no conductive dust, explosive gas or corrosive gas. When the metal material with grease and the like needs to be heated, a large amount of volatile gas will affect and corrode the surface of the electric heating element, destroying it and shortening its life. Therefore, when heating, it should be prevented in time and sealed containers or appropriate openings should be excluded.Metal injection molding vacuum sintering furnace
top of page
To test this feature, visit your live site.
The use of ceramic fiber muffle furnace
The use of ceramic fiber muffle furnace
1 comment
Like
1 Comment
bottom of page
ty